DISTRIBUTOR MIXER - MD`60

Technical specifications

Overall Width: 2528 mm.

Overall Length: 5258 mm.

Total Height: 2404 mm.

Capacity (Volume of tank): 6 mts.3.

Mixing time: 2 to 6 minutes (according to determined ration) .

Height of discharge: Adjustable and preset to the need.

Wheels: 1000 x 16.

Accessories Optional: Electric Scale.

Minimum Required Power: 70/80 HP.

D.D.F regime: 540 rpm.

Hydraulic System: 22 Lts pump. At 100 kg / m2

Double Command

General structure:
Completely constructed of stamped sheet, conformed, establishing great robustness and rigidity, with a very particular design and aesthetics.

Removable Shaft Ends:
Built in steel 2.1 / 2 "(63.5 mm.) Leaves 1045, nodular cast iron hub with adjustable bearings 30211, 30208 and retainer sav 5080 each.

Cuba or the hopper:
Constructed in stamped sheet

Floor:
Changeable in the form of a punt, totally abulonado.

Inner augers (quantity 3):
Bottom (quantity 1): diameter 534 mm. In a 5/16 "(7.93 mm) sheet with reduced pitch, mounted on a seamless tube shaft (diameter 114.3 mm) and with a large thickness. The ends are ablated with a flange system, which makes very Easy your assembly.
Superior (quantity 2): diameter 426 mm. In 1/4 "(6.35 mm) sheet, also mounted on a seamless tube (diameter 73 mm) of great thickness. The ends are ablated with a flange system, which makes assembly very easy.

Transmission system:
It is realized by means of pinion to crown, cemented with chains to rollers of 1 "handle 80 and simple chain of 1.1 / 4 handle 100 in the main part, generating a very light and resistant operation, of easy access for its lubrication.

Discharge system:
It is totally hydraulic, consisting of a tray two (2) floating augers, controlled by a hydraulic orbital motor. Its discharge height positioning is adjustable or preset by means of a register that presses a limit switch.

Guillotine gate:
It is hydraulically operated.